AEROSOLS |
|
Aerosol spray is the name given to a type of canister containing liquid under pressure from pressurized vapor in equilibrium with another liquid, which often also dissolves the payload (see propellant below). When the can's valve is opened, the liquid is forced out of a small hole and emerges as an aerosol, or mist. As gas expands to drive out the payload, some propellant evaporates inside the can to maintain an even pressure. Outside the can, the droplets of propellant evaporate rapidly, leaving the payload suspended as very fine particles or droplets. Typical liquids dispensed in this way are insecticides, deodorants and paints. An atomiser is a similar device that is pressurised by a hand-operated pump rather than by stored gas.
|
COATINGS |
|
A coating is a covering that is applied to an object to protect it or change its appearance. They may be applied as liquids, gases or solids.
Examples of coatings:
Anodizing
Chemical vapor deposition and physical vapor deposition
Chromate conversion coating
Enamel (paint)
Industrial coating
Oxide (coating)
Paint
Plasma coatings
Electroless plating or electrochemical plating
Phosphate (coating)
Polymer coatings, such as Teflon
Sputtered or vacuum deposited materials
Plate steel is often ordered from the mill pickled and oiled)
Enamel (vitreous)
Fusion bonded epoxy coating (FBE coating)
|
FDA |
|
The Food and Drug Administration (FDA) of the United States is the government agency responsible for regulating food (human and animal), dietary supplements, drugs (human and animal), cosmetics, medical devices (human and animal), biologics, and blood products in the United States.
|
PLASTICS |
|
Plastic covers a range of synthetic or semisynthetic polymerization products. They are composed of organic condensation or addition polymers and may contain other substances to improve performance or economics. There are few natural polymers generally considered to be "plastics". Plastics can be formed into objects or films or fibers. Their name is derived from the fact that many are malleable, having the property of plasticity. Plastics are designed with immense variation in properties such as heat tolerance, hardness, resiliency and many others. Combined with this adaptability, the general uniformity of composition and light weight of plastics ensures their use in almost all industrial segments.
|
|
