|
Categories To Find "Stoves" Experts:
|
ANTIQUES |
|
Antiques (Latin antiquus, old) are objects which have reached an age which makes them a witness of a previous era in human society.
Antiques are usually objects which show some degree of craftsmanship, or a certain attention to design such as a desk or the early automobile. In a consumer society, an antique is above all an object whose atypical construction and age give it a market value superior to similar objects of recent manufacture. Any historical museum makes a considerable use of antiques in order to illustrate historical events and give them a practical context.
|
BOILERS |
|
A boiler is a closed vessel in which water or other fluid is heated under pressure. The steam or hot fluid is then circulated out of the boiler for use in various process or heating applications. A safety valve is required to prevent over pressurisation and possible explosion of a boiler.
|
CARBON MONOXIDE EMISSIONS |
|
Carbon monoxide, chemical formula CO, is a colorless, odorless, tasteless, flammable and highly toxic gas. It is a major product of the incomplete combustion of carbon and carbon-containing compounds. It is less dense than air under ordinary conditions, however it accumulates on the ground, meaning that if poisoning causes loss of consciousness the amount of carbon monoxide inhaled increases and so fatality is radically increased. It is very slightly soluble in water and burns in air with a characteristic blue flame, producing carbon dioxide; it is a component of producer gas and water gas, which are widely used artificial fuels. It is a reducing agent, removing oxygen from many compounds and is used in the reduction of metals, e.g., iron , from their ores. At high pressures and elevated temperatures it reacts with hydrogen in the presence of a catalyst to form methanol. Carbon monoxide is formed by combustion of carbon in oxygen at high temperatures when there is an excess of carbon. It is also formed with a byproduct oxygen by decomposition of carbon dioxide at very high temperatures (above 2,000 °C). It is present in the exhaust of internal-combustion engines, often the exhaust of automobiles, and is generated in coal stoves, furnaces, and gas appliances that do not get enough air. This may be due to insufficient ventilation or other reasons.
|
INDUCTION HEATING |
|
Induction heating is the process of heating a metal object by electromagnetic induction, where eddy currents are generated within the metal and resistance leads to Joule heating of the metal. An induction heater (for any process) consists of an electromagnet, through which a high-frequency AC is passed. Heat may also be generated by magnetic hysteresis losses.
|
LIQUIFIED PETROLEUM GAS - LPG - LP GAS |
|
Liquified petroleum gas (also called liquefied petroleum gas, liquid petroleum gas, LPG, LP Gas, or autogas) is a mixture of hydrocarbon gases used as a fuel in heating appliances and vehicles, and increasingly replacing chlorofluorocarbons as an aerosol propellant and a refrigerant to reduce damage to the ozone layer. Varieties of LPG bought and sold include mixes that are primarily propane, mixes that are primarily butane, and mixes including both propane and butane, depending on the seasonin winter more propane, in summer more butane. Propylene and butylenes are usually also present in small concentration. A powerful odorant, ethanethiol, is added so that leaks can be detected easily. LPG is manufactured during the refining of crude oil, or extracted from oil or gas streams as they emerge from the ground.
|
MICROWAVE HEATING |
|
A microwave oven, or microwave, is a kitchen appliance employing microwave radiation primarily to cook or heat food. Microwave ovens have revolutionized cooking since their use became widespread in the 1970s.
|
PLASTICS |
|
Plastic covers a range of synthetic or semisynthetic polymerization products. They are composed of organic condensation or addition polymers and may contain other substances to improve performance or economics. There are few natural polymers generally considered to be "plastics". Plastics can be formed into objects or films or fibers. Their name is derived from the fact that many are malleable, having the property of plasticity. Plastics are designed with immense variation in properties such as heat tolerance, hardness, resiliency and many others. Combined with this adaptability, the general uniformity of composition and light weight of plastics ensures their use in almost all industrial segments.
|
|
Still can't find the expert you want?
|
Try using a broader keyword search or browse our Category Directory.
|
|
Stoves Experts Witnesses - Stoves Forensic Consultants.
Find Stoves experts and consultants for Stoves litigation support. Available to be Stoves expert witnesses and provide Stoves forensic consulting in Stoves litigation, in addition prepare Stoves expert witness reports for use in deposition and/or in-court trial testimony.
Find Experts on
Stoves
|
|
