AEROSOLS |
|
Aerosol spray is the name given to a type of canister containing liquid under pressure from pressurized vapor in equilibrium with another liquid, which often also dissolves the payload (see propellant below). When the can's valve is opened, the liquid is forced out of a small hole and emerges as an aerosol, or mist. As gas expands to drive out the payload, some propellant evaporates inside the can to maintain an even pressure. Outside the can, the droplets of propellant evaporate rapidly, leaving the payload suspended as very fine particles or droplets. Typical liquids dispensed in this way are insecticides, deodorants and paints. An atomiser is a similar device that is pressurised by a hand-operated pump rather than by stored gas.
|
AMBULANCE |
|
An ambulance is a vehicle designated for the transport of sick or injured people. The first ambulances called by that name were horse ambulances used in the American Civil War. The first practical ambulances were created by Dominique Jean Larrey, a French surgeon (17661842), for use in the Napoleonic Wars. Modern-day ambulances are typically large automobiles on a van or light truck chassis.
|
ARBORIST / TREE |
|
An arborist or tree surgeon is a professional who manages and maintains trees (generally in an urban environment). This can include planting, pruning, structural support, the treatment of disease, insect, or abiotic disorders, lightning protection, and tree removal. It also can include planning, consulting, report writing and even legal testimony. Because trees provide many benefits to the landscape and to people, but they are also very large, heavy, and complex organisms, they require monitoring and care to ensure survival and safety in the human landscape.
|
AUTOMOTIVE |
|
Automotives refers to design and manufacture of self-propelled mobility systems such as automobiles, trucks and buses, construction equipment, aircraft, aerospace vehicles, marine transports, trains and railroads, and other transit systems. Usually these mobility systems carry its own source of power while in operations, with the exceptions being electric locomotive and Magnetic levitation train.
|
AUTOPSIES |
|
An autopsy, also known as a post-mortem examination or an obduction, is a medical procedure that consists of a thorough examination of a corpse to determine the cause and manner of a persons death and to evaluate any disease or injury that may be present. It is usually performed by a specialized medical doctor called a pathologist.
|
BREACH OF CONTRACT |
|
Breach of contract is a legal concept in which a binding agreement or bargained-for exchange is not honored by one or more of the parties to the contract by non-performance or interference with the other partys performance.
|
CHILD PORNOGRAPHY |
|
Generally, child pornography (sometimes referred to as CP, child porn, KP, or kiddie porn) is an illegal form of pornography, featuring minors. The term "child" is defined for this purpose by each country's child pornography laws, and these laws also set forth criteria to use in determining whether a particular depiction of a child is child pornography.
|
CLOTHING / GARMENT / APPAREL |
|
Clothing is defined, in its broadest sense, as coverings for the torso and limbs as well as coverings for the hands (gloves), feet (socks, shoes, sandals, boots) and head (hats, caps). Humans nearly universally wear clothing, which is also known as dress, garments, attire, or apparel. People wear clothing for functional as well as for social reasons. Clothing protects the vulnerable nude human body from the extremes of weather and other features of our environment. But every article of clothing also carries a cultural and social meaning.
|
COATINGS |
|
A coating is a covering that is applied to an object to protect it or change its appearance. They may be applied as liquids, gases or solids.
Examples of coatings:
Anodizing
Chemical vapor deposition and physical vapor deposition
Chromate conversion coating
Enamel (paint)
Industrial coating
Oxide (coating)
Paint
Plasma coatings
Electroless plating or electrochemical plating
Phosphate (coating)
Polymer coatings, such as Teflon
Sputtered or vacuum deposited materials
Plate steel is often ordered from the mill pickled and oiled)
Enamel (vitreous)
Fusion bonded epoxy coating (FBE coating)
|
CONSTRUCTION |
|
In project architecture and civil engineering, construction is the building or assembly of any infrastructure. Although this may be thought of as a single activity, in fact construction is a feat of multitasking. Normally the job is managed by the construction manager, supervised by the project manager, design engineer or project architect. While these people work in offices and make the most money, every construction project requires a large number of laborers to complete the physical task of construction.
|
CONSUMER CONFUSION |
|
Consumers can and do get confused, especially with the massive increase in choice available and the increase in complexity of products. It seems plausible that consumer confusion, like most consumer attributes, must have a direct and significant impact on marketing strategy. Yet most of what is written on the subject is tangential and scattered over a number of disciplines. A study explores the various views together under one single heading that will be of interest to marketers and business managers.
|
CONSUMER MARKETING |
|
Find CONSUMER MARKETING experts and consultants for CONSUMER MARKETING litigation support. Available to be CONSUMER MARKETING expert witnesses and provide CONSUMER MARKETING forensic consulting in CONSUMER MARKETING litigation, in addition prepare CONSUMER MARKETING expert witness reports for use in deposition and/or in-court trial testimony.
|
CONTRACTS - INTERPRETATION |
|
A contract is a promis or an agreement that is enforced or recognized by the law. In the civil law, contracts are considered to be part of the general law of obligations. This article describes the law relating to contracts in common law jurisdictions.
Contract theory comprises many different theories and various interpretations of the various body of rules and subrules that define Contract Law.
Classical contract theory is the set of ideas and assumptions that underpinned the development of contract law in England and the United States during the 19th century. During this period, the prevailing liberal individualist philosophy of laissez faire elevated contract to a position of central importance in the law.
|
COPYRIGHT - GENERAL |
|
Copyright is a set of exclusive rights granted by governments to regulate the use of a particular expression of an idea or information. At its most general, it is literally "the right to copy" an original creation. In most cases, these rights are of limited duration. The symbol for copyright is ©.
|
CORROSION EVALUATIONS |
|
Corrosion is deterioration of intrinsic properties in a material due to reactions with its environment. Weakening of steel due to oxidation of the iron atoms is a well-known example of electrochemical corrosion. This type of damage usually affects metallic materials, and typically produces oxide(s) and/or salt(s) of the original metal. Corrosion also includes the dissolution of ceramic materials and can refer to discoloration and weakening of polymers by the sun's ultraviolet light.
|
DOORS AND GATES |
|
A door is a generally floor-length opening in a wall (or other partition), often equipped with a hinged or sliding panel which can be moved to leave the opening accessible, or to close it more or less securely. Doors are nearly universal in structures of all kinds (especially houses and other buildings), allowing passage between inside and outside, or among internal rooms. Doors are also found in vehicles, cupboards, cages, etc. A gate is a point of entry to a space enclosed by walls, or an opening in a fence. Gates may prevent or control entry or exit, or they may be merely decorative.
|
EDUCATION |
|
Education is a social science that encompasses teaching and learning specific knowledge, beliefs, and skills. Licensed and practicing teachers in the field use a variety of methods and materials in order to impart a curriculum. There has been a plethora of journals, magazines, books, and digests in the field of education that addresses these areas. Such literature addresses the teaching practices, with subjects that include lectures, game playing, testing, scheduling, record keeping, bullying, seating arrangements, interests, motivation, and computer access. However, the most important factors in any teacher's effectiveness is the interaction with students and personality of the teacher. The quality of their relationships provides the impetus for inspiration. The best teachers are able to translate good judgment, experience, and wisdom into the art of communication that students find compelling. It is their ability to understand and overcome prejudices, generate passion, and recognize potential that enable teachers to invigorate students with higher expectations of themselves and society at large. The goal is aiding the growth of students so that they become productive members of a migratory society. An imparting of culture from generation to generation (see socialisation) promotes a greater awareness and responsiveness through social maturity to the needs of an increasingly diversified global society.
|
ENVIRONMENT |
|
The natural environment comprises all living and non-living things that occur naturally on Earth. In its purest sense, it is thus an environment that is not the result of human activity or intervention. The natural environment may be contrasted to "the built environment."
|
ENVIRONMENTAL HEALTH |
|
Regulatory compliance, asbestos and lead-based paint assessment, soil/groundwater investigations, wastes classification, contaminant release mechanisms, geology studies, and endangerment assessments
|
ENVIRONMENTAL IMPACT |
|
Regulatory compliance, asbestos and lead-based paint assessment, soil/groundwater investigations, wastes classification, contaminant release mechanisms, geology studies, and endangerment assessments
|
ENVIRONMENTAL MEDICINE |
|
Regulatory compliance, asbestos and lead-based paint assessment, soil/groundwater investigations, wastes classification, contaminant release mechanisms, geology studies, and endangerment assessments
|
ESCALATOR |
|
An escalator is a conveyor transport device for transporting people, consisting of a staircase whose steps move up or down on tracks that keep the surfaces of the individual steps horizontal.
A moving walkway, moving sidewalk, travelator, or travellator is a slow conveyor belt that transports people horizontally or on an incline in a similar manner to an escalator. In both cases, riders can walk or stand. The walkways are often supplied in pairs, one for each direction.
|
HELICOPTERS |
|
A helicopter is an aircraft which is lifted and propelled by one or more horizontal rotors (propellers). Helicopters are classified as rotary-wing aircraft to distinguish them from conventional fixed-wing aircraft. The word helicopter is derived from the Greek words helix (spiral) and pteron (wing). The engine-driven helicopter was invented by the Slovak inventor Jan Bahyl. The first stable, single-rotor, fully-controllable helicopter to enter large full-scale production was made by Igor Sikorsky in 1942.
|
HORSES |
|
The horse (Equus caballus or Equus ferus caballus) is a sizeable ungulate mammal, one of ten modern species of the genus Equus. Horses have long been one of the most economically important domesticated animals, and have played an important role in the transport of people and cargo for thousands of years. Most notably, horses can be ridden by a person perched on a saddle attached to the animal, and are also widely harnessed to pull objects like wheeled vehicles or plows. In some human cultures, horses are also widely used as a source of food. Though isolated domestication may have occurred as early as 4500 BC, clear evidence of widespread use by humans dates to no earlier than 2000 BC, as evidenced by the Sintashta chariot burials, thus firmly establishing the domestication of the horse.
|
INDUSTRIAL ENGINEERING |
|
Industrial engineering is the engineering discipline that concerns the design, development, improvement, implementation and evaluation of integrated systems of people, knowledge, equipment, energy, material and process. Industrial engineering draws upon the principles and methods of engineering analysis and synthesis, as well as mathematical, physical and social sciences together with the principles and methods of engineering analysis and design to specify, predict and evaluate the results to be obtained from such systems. Industrial engineers work to eliminate wastes of time, money, materials, energy and other resources.
|
LAND FILL - WASTE DISPOSAL - GARBAGE DUMP |
|
Landfill is a waste disposal site for the deposit of the waste onto or into land (i.e., underground), including: internal waste disposal sites (i.e., landfill where a producer of waste is carrying out its own waste disposal at the place of production), and a permanent site (i.e., more than one year), which is used for temporary storage of waste, but excluding: transfer facilities where waste is unloaded in order to permit its preparation for further transport for recovery, treatment or disposal elsewhere, and storage of waste prior to recovery or treatment for a period less than three years as a general rule or storage of waste prior to disposal for period less than one year.
|
LEAD |
|
Lead is a chemical element in the periodic table that has the symbol Pb (L. plumbum) and atomic number 82. A soft, heavy, toxic and malleable poor metal, lead is bluish white when freshly cut but tarnishes to dull gray when exposed to air. Lead is used in building construction, lead-acid batteries, bullets and shot, and is part of solder, pewter, and fusible alloys. Lead has the highest atomic number of all stable elements. (But see the article on Bismuth, which has a half life so long it can be considered stable.)
|
MARINE & MARITIME |
|
From the latin "maritimus", maritime refers to things relating to the sea. Maritime law (also referred to as Admiralty law) is a distinct body of law which governs maritime questions and offenses.
|
MEDICO-LEGAL |
|
The plaintiff has the burden of proof. Expert witnesses are usually required to testify as to practice standards, while lay witnesses must confine their testimony to facts they perceived with their own senses. To be qualified as an expert, a person must have a sufficient level of education, training, and experience in the relevant field, and it must be shown that their testimony will assist the judge and/or jury in determining a contested issue. The law requires that lay jurors or judges, being untrained in medicine, must accept expert evidence as to whether the provider deviated from the requisite standards but since the plaintiff and the defendant will usually each hire their own experts, there will be conflicting opinions.
|
MOTORCYCLE HELMETS |
|
A motorcycle helmet is a type of protective headgear used by motorcycle riders. The primary goal of a motorcycle helmet is to protect the rider's head during impact, although many helmets provide additional conveniences, such as face shields, ear protection, intercom etc.
|
PAINT |
|
Paint is the general term for a family of products used to protect and add color to an object or surface by covering it with a pigmented coating. As a verb, painting is the application of paint. One who paints is called a painter.
|
PHOTOGRAPHY |
|
Photography is the process of making pictures by means of the action of light. It involves recording light patterns, as reflected from objects, onto a sensitive medium through a timed exposure. The process is done through mechanical, chemical or digital devices commonly known as cameras.
The word comes from the Greek words φως phos ("light"), and γραφις graphis ("stylus", "paintbrush") or γραφη graphê, together meaning "drawing with light" or "representation by means of lines" or "drawing." Traditionally, the product of photography has been called a photograph. The term photo is a convenient abbreviation. Many people also call them pictures. In digital photography, the term image has begun to replace photograph. This term is neither more nor less correct than photograph, either in film or digital photography. (The term image is traditional in geometric optics.)
|
PLASTICS |
|
Plastic covers a range of synthetic or semisynthetic polymerization products. They are composed of organic condensation or addition polymers and may contain other substances to improve performance or economics. There are few natural polymers generally considered to be "plastics". Plastics can be formed into objects or films or fibers. Their name is derived from the fact that many are malleable, having the property of plasticity. Plastics are designed with immense variation in properties such as heat tolerance, hardness, resiliency and many others. Combined with this adaptability, the general uniformity of composition and light weight of plastics ensures their use in almost all industrial segments.
|
POLLUTION |
|
Pollution is the release of environmental contaminants. Carbon monoxide, sulfur dioxide, chlorofluorocarbons (CFCs), and nitrogen oxides produced by industry and motor vehicles are common air pollutants. Sunlight converts nitrogen oxides and hydrocarbons to ozone or smog. Water pollutants may consist of a wide range of organic and inorganic chemicals such as heavy metals, petrochemicals, chloroform, and bacteria. Water pollution may also occur in the form of thermal pollution and dissolved oxygen depletion. Soil contamination is an important aspect of environmental pollution; this phenomenon occurs when chemicals are released by spill or underground storage tank leakage. Among the most significant soil contaminants are hydrocarbons, heavy metals, MTBE, herbicides, pesticides and chlorinated hydrocarbons. The U.S., Russia, China and Japan are the world leaders in air pollution emissions; however, Canada is the number two country on a per capita basis.
|
QUALITY ASSURANCE |
|
In engineering and manufacturing, quality control and quality engineering are involved in developing systems to ensure products or services are designed and produced to meet or exceed customer requirements and expectations. These systems are often developed in conjunction with other business and engineering disciplines using a cross-functional approach.
|
STROKE |
|
A stroke, also known as cerebrovascular accident (CVA), is an acute neurologic injury whereby the blood supply to a part of the brain is interrupted, either by a clot in the artery or if the artery bursts. The result is that the part of the brain perfused by that artery no longer can receive oxygen carried by the blood and it dies (becomes necrotic) with cessation of function from that part of the brain. In addition to tissue death, hemorrhages also cause damage from physical impingement of blood on the brain tissue. Stroke is a medical emergency and can cause permanent neurologic damage or even death if not promptly diagnosed and treated. It is the third leading cause of death and adult disability in the US and industrialized European nations (Jauch, 2005).
|
TRADE DRESS |
|
Trade dress refers to characteristics of the visual appearance of a product or its packaging (or even the facade of a building such as a restaurant) that may be registered and protected from being used by competitors in the manner of a trademark. These characteristics can include the three-dimensional shape, graphic design, color, or even smell of a product and/or its packaging.
|
WASTE DISPOSAL MANAGEMENT |
|
Waste management is the collection, transport, processing or disposal of waste materials, usually ones produced by human activity, in an effort to reduce their effect on human health or local aesthetics or amenity. A subfocus in recent decades has been to reduce waste materials' effect on the natural world and the environment and to recover resources from them.
|
WATERPROOFING |
|
Waterproofing is a method by which an item is made resistant to damage by water. It is used in many areas, including clothing
|
|
