Found 11 oxidation Experts and Expert Witnesses.
|
 |
|
|
| 20 years chemical engineering R&D, teachnical consulting and expert witness for attorneys. Expertise in applied chemistry, engineering, polymers, and chemical processes/products
|
|
|
|
| Pathologist certified in Anatomic, Clinical and Forensic Pathology. Former chief medical examiner of Jackson County (Kansas City), MO. Nearly two decades of experience in forensic pathology and death investigation. Private and medicolegal autopsy. Expert forensic pathology consultation for civil and criminal legal cases....
|
|
|
|
| Active Cardiac Surgeon with extensive background and knowledge.
|
|
|
|
| Bodycote Polymer is a materials technology consulting firm and laboratory specializing in failure analysis of plastic components and products, polymer analysis, and product development.
|
|
|
|
| Extensive investigation, research, deposition and expert witness testimony in state and federal environmental cases.
|
|
|
|
| Nationally renowned expert provides litigation support and expert testimony involving fire & explosions, chemical engineering and thermodynamics, nuclear and radiation chemistry and hazardous materials....
|
|
|
|
| I have focused on all aspects of wood and cellulose chemistry over the past 30 years of research, familiar with a broad range of wood products.
|
|
|
|
| EW #461 is a metallurgical/materials engineer and obtained his M.S. and Ph.D. from UCLA, and has over 20 year of industry experience.
|
|
|
|
| Project Leader and Consulting Engineer with expertise in power plant/industrial facility materials selection, nuclear power, corrosion prevention, failure analysis, ASTM/ASME, NDE and QA.
|
|
|
|
| 25 years experience solving heat transfer, combustion, incineration, RCRA permit submittal and air pollution control system problems. Therm-A-Cor specializes in optimizing the operation of existing equipment....
|
|
|
|
| Board certified physician in both Neurology and Occupational and Envrionmental Medicine.
|
|
|
|
| Looking for a oxidation expert?
|
|
|
Find Oxidation experts and consultants for Oxidation litigation support at www.ewitness.com. Available to be Oxidation expert witnesses and provide Oxidation forensic consulting in Oxidation litigation, in addition prepare Oxidation expert witness reports for use in deposition and/or in-court trial testimony.
|
Categories To Find "Oxidation" Experts:
|
AEROSOLS |
|
Aerosol spray is the name given to a type of canister containing liquid under pressure from pressurized vapor in equilibrium with another liquid, which often also dissolves the payload (see propellant below). When the can's valve is opened, the liquid is forced out of a small hole and emerges as an aerosol, or mist. As gas expands to drive out the payload, some propellant evaporates inside the can to maintain an even pressure. Outside the can, the droplets of propellant evaporate rapidly, leaving the payload suspended as very fine particles or droplets. Typical liquids dispensed in this way are insecticides, deodorants and paints. An atomiser is a similar device that is pressurised by a hand-operated pump rather than by stored gas.
|
AUDIO TAPE |
|
Audio Magnetic tape is a non-volatile storage medium consisting of a magnetic coating on a thin plastic strip. Nearly all recording tape is of this type, whether used for video, audio storage or general purpose digital data storage using a computer.
|
AUTO - AIR BAGS |
|
An airbag, also known as a Supplementary/Secondary Restraint System (SRS) or as an Air Cushion Restraint System (ACRS), is a flexible membrane or envelope, inflatable to contain air or some other gas. Air bags are most commonly used for cushioning, in particular after very rapid inflation in the case of an automobile collision.
|
BATTERIES |
|
In science and technology, a battery is a device that stores chemical energy and makes it available in an electrical form. Batteries consist of electrochemical devices such as one or more galvanic cells, fuel cells or flow cells. The earliest known artifacts that may have been batteries are the Baghdad Batteries, from some time between 250 BCE and 640 CE. The modern development of batteries started with the Voltaic pile developed by the Italian physicist Alessandro Volta in 1800. The worldwide battery industry generates 48 billion dollars in sales annually (2005 estimate).
|
CARBON MONOXIDE EMISSIONS |
|
Carbon monoxide, chemical formula CO, is a colorless, odorless, tasteless, flammable and highly toxic gas. It is a major product of the incomplete combustion of carbon and carbon-containing compounds. It is less dense than air under ordinary conditions, however it accumulates on the ground, meaning that if poisoning causes loss of consciousness the amount of carbon monoxide inhaled increases and so fatality is radically increased. It is very slightly soluble in water and burns in air with a characteristic blue flame, producing carbon dioxide; it is a component of producer gas and water gas, which are widely used artificial fuels. It is a reducing agent, removing oxygen from many compounds and is used in the reduction of metals, e.g., iron , from their ores. At high pressures and elevated temperatures it reacts with hydrogen in the presence of a catalyst to form methanol. Carbon monoxide is formed by combustion of carbon in oxygen at high temperatures when there is an excess of carbon. It is also formed with a byproduct oxygen by decomposition of carbon dioxide at very high temperatures (above 2,000 °C). It is present in the exhaust of internal-combustion engines, often the exhaust of automobiles, and is generated in coal stoves, furnaces, and gas appliances that do not get enough air. This may be due to insufficient ventilation or other reasons.
|
CHEMISTRY |
|
Chemistry (derived from alchemy) is the science of matter at or near the atomic scale. In this pursuit chemistry deals with the properties of such matter, the tranformations of matter and the interactions of matter with other matter and with energy.
|
COATINGS |
|
A coating is a covering that is applied to an object to protect it or change its appearance. They may be applied as liquids, gases or solids.
Examples of coatings:
Anodizing
Chemical vapor deposition and physical vapor deposition
Chromate conversion coating
Enamel (paint)
Industrial coating
Oxide (coating)
Paint
Plasma coatings
Electroless plating or electrochemical plating
Phosphate (coating)
Polymer coatings, such as Teflon
Sputtered or vacuum deposited materials
Plate steel is often ordered from the mill pickled and oiled)
Enamel (vitreous)
Fusion bonded epoxy coating (FBE coating)
|
COMBUSTION |
|
Combustion or burning is a chemical process, an exothermic reaction between a substance (the fuel) and a gas (the oxidizer), usually O2, to release heat. In a complete combustion reaction, a compound reacts with an oxidizing element, and the products are compounds of each element in the fuel with the oxidizing element. For example:
CH4 + 2 O2 → CO2 + 2 2O + heat
CH2S + 6 F2 → CF4 + 2 HF + SF6 + heat
|
CORROSION EVALUATIONS |
|
Corrosion is deterioration of intrinsic properties in a material due to reactions with its environment. Weakening of steel due to oxidation of the iron atoms is a well-known example of electrochemical corrosion. This type of damage usually affects metallic materials, and typically produces oxide(s) and/or salt(s) of the original metal. Corrosion also includes the dissolution of ceramic materials and can refer to discoloration and weakening of polymers by the sun's ultraviolet light.
|
DUST CONTROL |
|
Dust consists of tiny solid particles carried by air currents. These articles are formed by a disintegration or fracture process, such as grinding, crushing, or impact. The Mine Safety and Health Administration (MSHA) defines dust as finely divided solids that may become airborne from the original state without any chemical or physical change other than fracture.
|
ELECTROPHYSIOLOGY |
|
Electrophysiology is the study of the electrical properties of biological cells and tissues. It involves measurements of voltage differences across cell membrane, and studies of how the flow of electrical current across membranes is regulated. In neuroscience, it includes measurements of the electrical activity of neurons, and particularly action potential activity.
|
FIBER OPTICS |
|
An optical fiber (or fibre) is a transparent thin fiber, usually made of glass or plastic, for transmitting light. Fiber optics is the branch of science and engineering concerned with such optical fibers.
Optical fibers are commonly used in telecommunication systems, as well as in illumination, sensors, and imaging optics.
|
HAZMET - HAZARDOUS MATERIALS |
|
A hazardous material (HAZMAT) is any solid, liquid, or gas that can cause harm to humans, other living organisms, or the environment due to being radioactive, flammable, explosive, toxic, corrosive, a biohazard, an oxidizer, an asphyxiant, or capable of causing severe allergic reactions. The term hazardous material is used in this context almost exclusively in the United States. The equivalent term in the rest of the English-speaking world is Dangerous Goods.
|
HYDROLOGY |
|
Hydrology (from Greek: Yδρoλoγια, Yδωρ+Λoγos, Hydrologia, the "study of water") is the study of the movement, distribution, and quality of water throughout the Earth, and thus addresses both the hydrologic cycle and water resources. A practitioner of hydrology is a hydrologist, working within the fields of either earth or environmental science, or civil and environmental engineering.
|
LEAD |
|
Lead is a chemical element in the periodic table that has the symbol Pb (L. plumbum) and atomic number 82. A soft, heavy, toxic and malleable poor metal, lead is bluish white when freshly cut but tarnishes to dull gray when exposed to air. Lead is used in building construction, lead-acid batteries, bullets and shot, and is part of solder, pewter, and fusible alloys. Lead has the highest atomic number of all stable elements. (But see the article on Bismuth, which has a half life so long it can be considered stable.)
|
MEDICAL |
|
Medical - Having to do with or anything pertaining to Medical treatment, Medical Malpractice, Medical review, Medical Litigation.
Find MEDICAL experts and consultants for MEDICAL litigation support. Available to be MEDICAL expert witnesses and provide MEDICAL forensic consulting in MEDICAL litigation, in addition prepare MEDICAL expert witness reports for use in deposition and/or in-court trial testimony.
|
METALLURGY |
|
Metallurgy is a domain of materials science and of materials engineering that studies the physical and chemical behavior of metallic elements, their intermetallic compounds and their mixtures, which are called alloys.
Extractive metallurgy is the practice of separating metals from their ore, and refining them into a pure metal. In order to convert a metal oxide or sulfide to a metal, the metal oxide must be reduced either chemically or electrolytically.
|
MICROWAVE HEATING |
|
A microwave oven, or microwave, is a kitchen appliance employing microwave radiation primarily to cook or heat food. Microwave ovens have revolutionized cooking since their use became widespread in the 1970s.
|
OBSTETRICS |
|
Obstetrics is the surgical specialty dealing with the care of a woman and her offspring during pregnancy, childbirth and the puerperium (the period shortly after birth). Almost all modern obstetricians are also gynaecologists; see Obstetrics and gynaecology.
|
PAINT |
|
Paint is the general term for a family of products used to protect and add color to an object or surface by covering it with a pigmented coating. As a verb, painting is the application of paint. One who paints is called a painter.
|
PLASTICS |
|
Plastic covers a range of synthetic or semisynthetic polymerization products. They are composed of organic condensation or addition polymers and may contain other substances to improve performance or economics. There are few natural polymers generally considered to be "plastics". Plastics can be formed into objects or films or fibers. Their name is derived from the fact that many are malleable, having the property of plasticity. Plastics are designed with immense variation in properties such as heat tolerance, hardness, resiliency and many others. Combined with this adaptability, the general uniformity of composition and light weight of plastics ensures their use in almost all industrial segments.
|
POLLUTION |
|
Pollution is the release of environmental contaminants. Carbon monoxide, sulfur dioxide, chlorofluorocarbons (CFCs), and nitrogen oxides produced by industry and motor vehicles are common air pollutants. Sunlight converts nitrogen oxides and hydrocarbons to ozone or smog. Water pollutants may consist of a wide range of organic and inorganic chemicals such as heavy metals, petrochemicals, chloroform, and bacteria. Water pollution may also occur in the form of thermal pollution and dissolved oxygen depletion. Soil contamination is an important aspect of environmental pollution; this phenomenon occurs when chemicals are released by spill or underground storage tank leakage. Among the most significant soil contaminants are hydrocarbons, heavy metals, MTBE, herbicides, pesticides and chlorinated hydrocarbons. The U.S., Russia, China and Japan are the world leaders in air pollution emissions; however, Canada is the number two country on a per capita basis.
|
POWER PLANTS |
|
A fossil fuel power plant is an energy conversion center that combusts fossil fuels to produce electricity, designed on a large scale for continuous operation.
|
WOUND HEALING |
|
Wound healing, or wound repair, is the bodys natural process of regenerating dermal and epidermal tissue. When an individual is wounded, a set of events takes place in a predictable fashion to repair the damage. These events overlap in time (Midwood et al., 2004) and must be artificially categorized into separate steps: the inflammatory, proliferative, and maturation phases (Some authors consider healing to take place in four stages, by splitting different parts inflammation or proliferation into separate steps (Quinn, 1998; Dealey, 1999; Iba, 2004).
|
|
Still can't find the expert you want?
|
Try using a broader keyword search or browse our Category Directory.
|
|
Oxidation Experts Witnesses - Oxidation Forensic Consultants.
Find Oxidation experts and consultants for Oxidation litigation support. Available to be Oxidation expert witnesses and provide Oxidation forensic consulting in Oxidation litigation, in addition prepare Oxidation expert witness reports for use in deposition and/or in-court trial testimony.
Find Consulting Expert Witnesses who have experience with your problem and are willing help you with
Oxidation
|
|
