AIR QUALITY |
|
Air quality generally refers to either the outdoor and indoor air quality standards set by the US Government that determines the acceptable levels of certain gaseous emissions.
|
BIOMEDICAL ENGINEERING |
|
Biomedical engineers use their expertise in biology, medicine, physics, mathematics, engineering science and communication to make the world a healthier place. The biomedical engineer is ideally trained to work at the intersection of science, medicine and mathematics to solve biological and medical problems.
|
CEMENT / CONCRETE |
|
Cement is a material for bonding stone or brick. The term cement is most commonly used to refer more specifically to powdered materials which develop strong adhesive qualities when combined with water. These materials are more properly known as hydraulic cements. Hydraulic limes, natural pozzolana and Portland cements are the more common hydraulic cements, with portland cement being the most important in construction. Gypsum plaster and common lime are not hydraulic cements. Cement is an important ingredient in concrete.
|
CLAIMS |
|
A claim is a legal action to obtain money, property or the enforcement of a right protected by law against another party.
Individuals and businesses purchase insurance policies to protect against monetary losses. In the event of a loss, policyholders submit claims, or requests for payment, seeking compensation for their loss. Adjusters, appraisers, examiners, and investigators work primarily for property and casualty insurance companies, for whom they handle a wide variety of claims alleging property damage, liability, or bodily injury. Their main role is to investigate the claims, negotiate settlements, and authorize payments to claimants, all the while mindful not to violate the claimants rights under Federal and State privacy laws. They must determine whether the customers insurance policy covers the loss and how much of the loss should be paid to the claimant. Although many adjusters, appraisers, examiners, and investigators have overlapping functions and may even perform the same job, the insurance industry generally assigns specific roles to each of these claims workers.
|
DOORS AND GATES |
|
A door is a generally floor-length opening in a wall (or other partition), often equipped with a hinged or sliding panel which can be moved to leave the opening accessible, or to close it more or less securely. Doors are nearly universal in structures of all kinds (especially houses and other buildings), allowing passage between inside and outside, or among internal rooms. Doors are also found in vehicles, cupboards, cages, etc. A gate is a point of entry to a space enclosed by walls, or an opening in a fence. Gates may prevent or control entry or exit, or they may be merely decorative.
|
ERRORS & OMISSIONS |
|
In the litigious world we live in today, many business owners protect themselves with errors and omissions insurance (E&O). This type of insurance may be appropriate for anyone who gives advice, makes educated recommendations, designs solutions or represents the needs of others, such as teachers, consultants, software developers, ad copywriters, Web page designers, placement services, telecommunication carriers or inspectors.
|
EXPERT WITNESS SALES |
|
An expert witness is a witness, who by virtue of education, or profession, or experience, is believed to have special knowledge of his subject beyond that of the average person, sufficient that others may officially (and legally) rely upon his opinion.
|
HOME INSPECTION |
|
Find HOME INSPECTION experts and consultants for HOME INSPECTION litigation support. Available to be HOME INSPECTION expert witnesses and provide HOME INSPECTION forensic consulting in HOME INSPECTION litigation, in addition prepare HOME INSPECTION expert witness reports for use in deposition and/or in-court trial testimony.
|
HVAC - HEAT VENTITATION AIR CONDITIONING |
|
HVAC (pronounced either "H-V-A-C" or, occasionally, "H-VAK") is an initialism/acronym that stands for "heating, ventilation and air-conditioning". This is sometimes referred to as climate control.
These three functions are closely interrelated, as they control the temperature and humidity of the air within a building in addition to providing for smoke control, maintaining pressure relationships between spaces, and providing fresh air for occupants. In modern building designs, the design, installation and control systems of these functions are integrated into a single "HVAC" system.
The term air handler can mean a whole unit including the blower, heating and cooling elements, filter racks or chamber and dampers, but not including the ductwork through the building.
|
IME - INDEPENDENT MEDICAL EXAMINER |
|
A medical professional hired by one side in a personal injury case to evaluate the claimed injuries of a plaintiff. When this examiner is hired by the defendant, the medical professional will look for other possible causes of any personal injury alleged. Industrial Hygienist An expert witness who provides opinion testimony concerning the collection, sampling and analysis of toxic mold and other environmental contaminants.
|
INDOOR AIR QUALITY (IAQ) |
|
Indoor Air Quality (IAQ) deals with the content of interior air that could affect health and comfort of building occupants. The IAQ may be compromised by microbial contaminants (mold, bacteria), chemicals(such as carbon monoxide,radon}, allergens, or any mass or energy stressor that can induce health effects. Often it is perceived that outdoor air is polluted, but indoor air is acceptable. Scientific studies illustrate the falsity of this perception, and, in fact, indoor air is often a greater health hazard than the corresponding outdoor setting.
|
INDUSTRIAL ENGINEERING |
|
Industrial engineering is the engineering discipline that concerns the design, development, improvement, implementation and evaluation of integrated systems of people, knowledge, equipment, energy, material and process. Industrial engineering draws upon the principles and methods of engineering analysis and synthesis, as well as mathematical, physical and social sciences together with the principles and methods of engineering analysis and design to specify, predict and evaluate the results to be obtained from such systems. Industrial engineers work to eliminate wastes of time, money, materials, energy and other resources.
|
INSURANCE - PERSONAL INJURY PROTECTION (PIP) |
|
Personal Injury Protection (PIP) is an extension of car insurance available in some American states, which covers medical expenses and, in some cases, lost wages and other damages. PIP pays off regardless of who is at fault and is mandatory in some states, especially those with no-fault laws.
PIP can cover within the specified limits, the medical, hospital and funeral expenses of the insured, others in his vehicles and pedestrians struck by him. The basic coverage for the insured's own injuries on a first-party basis, without regard to fault. It is only available in certain states.
|
MEDICAL |
|
Medical - Having to do with or anything pertaining to Medical treatment, Medical Malpractice, Medical review, Medical Litigation.
Find MEDICAL experts and consultants for MEDICAL litigation support. Available to be MEDICAL expert witnesses and provide MEDICAL forensic consulting in MEDICAL litigation, in addition prepare MEDICAL expert witness reports for use in deposition and/or in-court trial testimony.
|
MEDICAL DEVICES |
|
A medical device is an instrument, apparatus, implement, machine, contrivance, implant, in vitro reagent, or other similar or related article, including a component part, or accessory which is:
recognized in the official National Formulary, or the United States Pharmacopoeia, or any supplement to them,
intended for use in the diagnosis of disease or other conditions, or in the cure, mitigation, treatment, or prevention of disease, in man or other animals, or
intended to affect the structure or any function of the body of man or other animals, and which does not achieve any of its primary intended purposes through chemical action within or on the body of man or other animals and which is not dependent upon being metabolized for the achievement of any of its primary intended purposes.
as defined by the US FDA.
|
METALLURGY |
|
Metallurgy is a domain of materials science and of materials engineering that studies the physical and chemical behavior of metallic elements, their intermetallic compounds and their mixtures, which are called alloys.
Extractive metallurgy is the practice of separating metals from their ore, and refining them into a pure metal. In order to convert a metal oxide or sulfide to a metal, the metal oxide must be reduced either chemically or electrolytically.
|
MOLD |
|
Molds are ubiquitous in nature, and mold spores are a common component of household dust. The term toxic mold is sometimes used to refer to mold-related indoor air quality problems.
|
ORTHOTICS |
|
Orthotics is the medical field concerned with the application and manufacture of orthoses, devices which support or correct the function of a limb or the torso. The term is derived from the Greek "ortho", to straighten. Sciences such as materials engineering, gait analysis, anatomy and physiology, and psychology contribute to the work done by orthotists, the professionals engaged in the field or orthotics. Individuals who benefit from an orthosis have sustained a physical impairment such as a stroke, spinal cord injury, or a congenital abnormality such as spina bifida or cerebral palsy.
|
PLASTICS |
|
Plastic covers a range of synthetic or semisynthetic polymerization products. They are composed of organic condensation or addition polymers and may contain other substances to improve performance or economics. There are few natural polymers generally considered to be "plastics". Plastics can be formed into objects or films or fibers. Their name is derived from the fact that many are malleable, having the property of plasticity. Plastics are designed with immense variation in properties such as heat tolerance, hardness, resiliency and many others. Combined with this adaptability, the general uniformity of composition and light weight of plastics ensures their use in almost all industrial segments.
|
POLLUTION |
|
Pollution is the release of environmental contaminants. Carbon monoxide, sulfur dioxide, chlorofluorocarbons (CFCs), and nitrogen oxides produced by industry and motor vehicles are common air pollutants. Sunlight converts nitrogen oxides and hydrocarbons to ozone or smog. Water pollutants may consist of a wide range of organic and inorganic chemicals such as heavy metals, petrochemicals, chloroform, and bacteria. Water pollution may also occur in the form of thermal pollution and dissolved oxygen depletion. Soil contamination is an important aspect of environmental pollution; this phenomenon occurs when chemicals are released by spill or underground storage tank leakage. Among the most significant soil contaminants are hydrocarbons, heavy metals, MTBE, herbicides, pesticides and chlorinated hydrocarbons. The U.S., Russia, China and Japan are the world leaders in air pollution emissions; however, Canada is the number two country on a per capita basis.
|
POLYMERS |
|
Polymer is a generic term used to describe a very long molecule consisting of structural units and repeating units connected by covalent chemical bonds. The term is derived from the Greek words: polys meaning many, and meros meaning parts [1]. The key feature that distinguishes polymers from other molecules is the repetition of many identical, similar, or complementary molecular subunits in these chains. These subunits, the monomers, are small molecules of low to moderate molecular weight, and are linked to each other during a chemical reaction called polymerization.
|
QUALITY ASSURANCE |
|
In engineering and manufacturing, quality control and quality engineering are involved in developing systems to ensure products or services are designed and produced to meet or exceed customer requirements and expectations. These systems are often developed in conjunction with other business and engineering disciplines using a cross-functional approach.
|
REAL ESTATE |
|
Real estate or immovable property is a legal term (in some jurisdictions) that encompasses land along with anything permanently affixed to the land, such as buildings. Real estate (immovable property) is often considered synonymous with real property (also sometimes called realty), in contrast with personal property (also sometimes called chattel or personalty).
|
SURGERY -COSMETIC /PLASTIC SURGERY |
|
Cosmetic -Plastic surgery is a general term for operative manual and instrumental treatment which is performed for functional or aesthetic reasons. The word "plastic" derives from the Greek plastikos meaning to mold or to shape; its use here is not connected with modern plastics.
|
SURGERY - PLASTIC |
|
Plastic surgery is a general term for operative manual and instrumental treatment which is performed for functional or aesthetic reasons. The word "plastic" derives from the Greek plastikos meaning to mold or to shape; its use here is not connected with modern plastics.
|
TORT LAWSUITS |
|
In the common law, a tort is a civil wrong, other than a breach of contract, for which the law provides a remedy. The origins of the modern law of torts lie in the old remedies of trespass and trespass on the case. The term itself comes from Law French and means, literally, "a wrong". In the French language, the phrase avoir tort translates to "to be wrong". The equivalent body of law in civil law legal systems is delict. A tort is a breach of a non-contractual duty potentially owed to the entire world, imposed by law. The majority of legal claims are brought in tort.
|
|
