CALL CENTER |
|
A call centre (Commonwealth English) or call center (American English) is a centralized office used for the purpose of receiving and transmitting a large volume of requests by telephone. A call centre is operated by a company to administer incoming product support or information inquiries from consumers. Outgoing calls for telemarketing, clientele, and debt collection are also made. In addition to a call centre, collective handling of letters, faxes, and e-mails at one location is known as a contact centre.
|
ELECTRONIC DATA RECOVERY |
|
Electronic Data recovery is the process of recovering data from primary storage media when it cannot be accessed normally. This can be due to physical damage to the storage device or logical damage to the file system that prevents it from being mounted by the host operating system.
|
PROPERTY DAMAGE |
|
Property damage is damage or destruction done to public or private property, caused either by a person who is not its owner or by natural phenomena. Property damage caused by persons is generally categorized by its cause: neglect (including oversight and human error), and intentional damage.
|
WELL LOG INTERPRETATION |
|
Well logging is a technique used in the oil and gas industry for recording rock and fluid properties to find hydrocarbon zones in the geological formations below the Earths crust. A logging procedure consists of lowering a logging tool on the end of a wireline into an oil well (or hole) to measure the rock and fluid properties of the formation. An interpretation of these measurements is then made to locate and quantify potential depth zones containing oil and gas (hydrocarbons). Logging tools developed over the years measure the electrical, acoustic, radioactive, electromagnetic, and other properties of the rocks and their contained fluids. Logging is usually performed as the logging tools are pulled out of the hole. This data is recorded to a printed record called a Well Log and is normally transmitted digitally to office locations. Well logging is performed at various intervals during the drilling of the well and when the total depth is drilled, which could range in depths from 300 m to 8000 m (1000 ft to 25,000 ft) or more.
|
|