AUTOMOBILE ELECTRICAL SYSTEMS |
|
An automotive electrical systems consists of several different components that provide the electrical power needed to start the car and provides all the functionality in the passenger compartment.
Lighting systems, battery and charging system, alternator, grounding system, all power and features like horn, radio, power windows, and door locks, security, wind shield wipers, and more.....
|
HVAC - HEAT VENTITATION AIR CONDITIONING |
|
HVAC (pronounced either "H-V-A-C" or, occasionally, "H-VAK") is an initialism/acronym that stands for "heating, ventilation and air-conditioning". This is sometimes referred to as climate control.
These three functions are closely interrelated, as they control the temperature and humidity of the air within a building in addition to providing for smoke control, maintaining pressure relationships between spaces, and providing fresh air for occupants. In modern building designs, the design, installation and control systems of these functions are integrated into a single "HVAC" system.
The term air handler can mean a whole unit including the blower, heating and cooling elements, filter racks or chamber and dampers, but not including the ductwork through the building.
|
LAND FILL - WASTE DISPOSAL - GARBAGE DUMP |
|
Landfill is a waste disposal site for the deposit of the waste onto or into land (i.e., underground), including: internal waste disposal sites (i.e., landfill where a producer of waste is carrying out its own waste disposal at the place of production), and a permanent site (i.e., more than one year), which is used for temporary storage of waste, but excluding: transfer facilities where waste is unloaded in order to permit its preparation for further transport for recovery, treatment or disposal elsewhere, and storage of waste prior to recovery or treatment for a period less than three years as a general rule or storage of waste prior to disposal for period less than one year.
|
ROOFING |
|
Roofs may be pitched (sloped) or low sloped in form. Low sloped roofs are commonly found on industrial/commercial type structures. Pitched roofs are the primary design found on residential homes. The most common type of low sloped roof for industrial/commercial structures are the conventional built-up-roof (BUR), modified bitumen, or single plies (EPDM, PVC, TPO). Metal standing seam roofs are becoming increasingly common on low sloped roof assemblies.
|
|
