|
|
 |
|
|
| Principal of firm established to provide independent investigation and expert testimony utilizing over 45 years of professional experience in mechanical and safety engineering, research, inspection and testing. Primarily involved with studying performance, determining defects, reconstructing accidents, evaluating construction, analyzing failures, discovering hazards, confirming intended use, misuse, abuse and/or safety violations in Consumer Products, Industrial Equipment, Construction Materials...
|
|
|
|
| Consulting and forensic engineering services. Issues addressed include all aspects of the design, fabrication, production and operation of electrical and electronic devices and products.
|
|
|
|
| 20 years chemical engineering R&D, teachnical consulting and expert witness for attorneys. Expertise in applied chemistry, engineering, polymers, and chemical processes/products
|
|
|
|
| Qualified as an expert witness in civil and criminal courts.
Injury biomechanics in automotive crashes, aircraft crashes, elevator failures, sports impacts and slips and falls.
|
|
|
|
| 25 years in the Mine Safety Industry
|
|
|
|
| Retired USCG Commander holding Ph.D. in Education with extensive experience in all aquatic accidents
|
|
|
|
| Chemical specialty products experience, specializing in paint & coatings, industrial chemicals, household chemicals, aerosols, hazardous materials, labels & warnings, laboratory testing and analysis.
|
|
|
|
| Medical device accidents, patient injury or death involving medical
Devices, medical device use errors, medical device product liability,
|
|
|
|
| This expert has over 45 years of experience in the mechanical engineering field. His experience includes the design of mechanical systems for the building industry as well as forensic engineering
analysis of mechanical systems and components....
|
|
|
|
| Industrial & Utility power generation and cogeneration expert. 30 years hands-on experience with plants from 100 kW to 1,000 MW. Extensive International experience arbitrations & litigations expert.
|
|
|
|
| Certified clinical engineer expertise: medical device safety, hospital accidents, and product liability.
|
|
|
|
| Provides mechanical engineering support in accident investigation and reconstruction covering failure analysis, process simulation, equipment reliability and safety. Specialized in areas of cranes, rigging, industrial forklifts, aerial devices, conveyors, and barges. Cover OSHA, State OSHA, ANSI/ASME B30, HST, CMAA, ASME B31.1 and B31.3....
|
|
|
|
| Crane Inspection Services, Inc. is accredited by OSHA to inspect, test, and issue documents of certification, when required, on shore-based material-handling devices, floating cranes.
|
|
|
|
| EW #765 is able to provide expertise in the areas of Medical device accidents
|
|
|
|
| 25 yrs experience w/medical equipment,Registered and Certified engineer. Director, Biomedical Engineering Dpt., Chairman technical standrads committees, Receipient FDA Commissioner Special Citation.
|
|
|
|
| EW #2935 is an award winning aviation safety expert with more than twenty-five years experience in aircraft design, aviation psychology, aircrew training and accident investigation.
|
|
|
|
| 30 years experience - all aspects of medical devices; Broad range of products; 31 patents; PI, PL & IP; Landmark cases; Plaintiff/defense; Seasoned, successful, affable; Impeccable references.
|
|
|
|
| Industry leader in Safety, Safe Use, Safe design, Standards, Regulations, Warnings, Training and Litigation involving construction machinery.
|
|
|
|
| He has conducted numerous accident investigations, provided written opinions, depositions and court testimony.
|
|
|
|
| Over 20 years experience in/with Internet, Computers, Programming, Data Processing, Dating and Social Networking, Community Portals, Engineering, Business Development.
|
|
|
|
| Over 25 years of industrial experience and working with attornies and insurance companies in the areas of product liability, failure analysis, patent disputes and glass fracture.
|
|
|
|
| Over 25 years of industrial experience and working with attornies and insurance companies in the areas of product liability, failure analysis, patent disputes and glass fracture.
|
|
|
|
| Bodycote Polymer is a materials technology consulting firm and laboratory specializing in failure analysis of plastic components and products, polymer analysis, and product development.
|
|
|
|
| Thirty years in telecommunications, directed energy weapons, and related optical/electronic technologies; MEMS, optical medical sensors, optoelectronics, product development; eight patents
|
|
|
|
| Qualified as an expert for medical devices and technology. Ph.D. in Biomedical Engineering, Licensed Engineer and Certified Clinical Engineer.
|
|
|
|
| Real World Forensic Engineering employs a group of Ph.D.- level Mechanical & Electrical engineering experts to assist our clients in developing fact-based solutions to their technical problems.
|
|
|
|
| Cases invovling impact biomechanics and personal injury related to everyday objects. Analysis of medical devices. Safety assessments.
|
|
|
|
| 40 years Expert services and forensic engineering for lifts, hoists, jacks, machines, material handling.
|
|
|
|
| EW #2875 has 13 years expertise with ADA Title III and Building Code Accessibility and available nationally for plaintiff and defense.
|
|
|
|
| CRAFT Forensic Services personnel have extensive training and experience with material handling equipment and are formally trained in the component technologies of material handling equipment designs.
|
|
|
|
| World-Class Plastic Scientists and an ISO-9000 certified state-of-the-art Testing Laboratory team up to provide Expert Witness and Failure Analysis services.
|
|
|
|
| 35 years of international experience in safety, personal injury, products liability, warnings, human factors and manufacturing.
|
|
|
|
| 40+ Years experience as a Mechanical Engineer dealing with all manner of machinery and vehicles.
|
|
|
|
| Fuel Gas and Related Products - 35 Years Hands-On Experience - Investigation, Consulting and Testimony
|
|
|
|
| Specializing in fire investigation fire protection full scale fire testing safety issues expert testimony litigation support
|
|
|
|
| Extensive experience involving electrical designs and failures. Twenty years practice as a technical manager performing the analysis of electrical failures resulting in loss.
|
|
|
|
| Mechanical and marine engineer-underwater equipment/materials, fiber optics, high-tension cables, machine design, theme park equipment/amusement rides, elastomers, fracture mechanics concrete and rock
|
|
|
|
| 29 years of experience investigating and reconstructing highway vehicle collisions, and has been directly involved in over 4000 collision investigations, collision analysis and collision reconstructions....
|
|
|
|
| Services relating to 911 and CAD event and dispatch creation for litigation. Specializes in large dispatch center event recreation and alanysis
|
|
|
|
| 25 years of experience in the mechanical design and analysis of structures, machinery, and facilities.
|
|
|
|
| Professional mariner, 40 yrs experience in the marine industry. Unlimited Tonnage Master. Experienced with injuries, collisions, navigation, seamanship, recreational boat accidents, fishing vessels.
|
|
|
|
| PH.D.-LEVEL UNIVERSITY PROFS, NATIONALLY RECOGNIZED, EXTENSIVE EXPERIENCE IN MECHANICAL ENGINNERING, METALLURGY, ELECTRICAL ENG., PRODUCT LIABILITY, PATENT REVIEW, SAFETY, TESTING, 50+ TESTIMONIES.
|
|
|
|
| InterCity is entering its 30th year as a provider of forensic engineering, consulting and expert testimony to thousands of law offices, insurance companies and government agencies.
|
|
|
|
| Analyse crash survivability based on biomechanical parameters with primary interest in children, and infants. Assess cause and affect "the physics" of a crash.
|
|
|
|
| 26 years experience as Emergency Medical Technician, including EMS instructor and chief of service. Consultant to state EMS agencies.
|
|
|
|
| Medical Legal Consultants, Screening for Medical, Dental and Psychiatric Malpractice
|
|
|
|
| EW #3835 has been providing litigation support in accident reconstruction for over 29 years. From initial investigation, through the process to final courtroom testimony, our highly qualified staff has assisted in hundreds of successful projects....
|
|
|
|
| Looking for a engineering safety devices expert?
|
|
|
Find Engineering Safety Devices experts and consultants for Engineering Safety Devices litigation support at www.ewitness.com. Available to be Engineering Safety Devices expert witnesses and provide Engineering Safety Devices forensic consulting in Engineering Safety Devices litigation, in addition prepare Engineering Safety Devices expert witness reports for use in deposition and/or in-court trial testimony.
|
Categories To Find "Engineering Safety Devices" Experts:
|
AEROSOLS |
|
Aerosol spray is the name given to a type of canister containing liquid under pressure from pressurized vapor in equilibrium with another liquid, which often also dissolves the payload (see propellant below). When the can's valve is opened, the liquid is forced out of a small hole and emerges as an aerosol, or mist. As gas expands to drive out the payload, some propellant evaporates inside the can to maintain an even pressure. Outside the can, the droplets of propellant evaporate rapidly, leaving the payload suspended as very fine particles or droplets. Typical liquids dispensed in this way are insecticides, deodorants and paints. An atomiser is a similar device that is pressurised by a hand-operated pump rather than by stored gas.
|
AUTO - AIR BAGS |
|
An airbag, also known as a Supplementary/Secondary Restraint System (SRS) or as an Air Cushion Restraint System (ACRS), is a flexible membrane or envelope, inflatable to contain air or some other gas. Air bags are most commonly used for cushioning, in particular after very rapid inflation in the case of an automobile collision.
|
AUTOMOBILE ACCIDENT |
|
Car accidents are damaging events involving road traffic, particularly automobiles. They can cause damage to vehicles, people or structures. Car accidents also called traffic collisions, auto accidents, road accidents, personal injury collisions, motor vehicle accidents, and (particularly by American radio traffic reporters) crashes kill an estimated 1.2 million people worldwide each year, and injure about forty times this number (WHO, 2004). The term "accident" is considered inappropriate by some, as reliable sources estimate that upwards of 90% are the result of driver negligence.
|
BICYCLE HELMETS |
|
A bicycle helmet is designed to provide head protection for cyclists. Helmets are most suitable for preventing injury in straight falls, and for reducing friction related damage to the head. Modern bicycle helmets were first developed in the 1970s.
|
BOILERS |
|
A boiler is a closed vessel in which water or other fluid is heated under pressure. The steam or hot fluid is then circulated out of the boiler for use in various process or heating applications. A safety valve is required to prevent over pressurisation and possible explosion of a boiler.
|
BUILDING INSPECTION |
|
Construction and building inspectors examine buildings, highways and streets, sewer and water systems, dams, bridges, and other structures to ensure that their construction, alteration, or repair complies with building codes and ordinances, zoning regulations, and contract specifications. Building codes and standards are the primary means by which building construction is regulated in the United States for the health and safety of the general public. National model building codes are published by the International Code Council (ICC), although many localities have additional ordinances and codes that modify or add to the National model codes. To monitor compliance with regulations, inspectors make an initial inspection during the first phase of construction and follow up with further inspections throughout the construction project. However, no inspection is ever exactly the same. In areas where certain types of severe weather or natural disasterssuch as earthquakes or hurricanesare more common, inspectors monitor compliance with additional safety regulations designed to protect structures and occupants during those events.
|
CANCER - GENERAL |
|
Cancer is a class of diseases or disorders characterized by uncontrolled division of cells and the ability of these cells to invade other tissues, either by direct growth into adjacent tissue through invasion or by implantation into distant sites by metastasis. This unregulated growth is caused by damage to DNA, resulting in mutations to genes that encode for proteins controlling cell division. Many mutation events may be required to transform a normal cell into a malignant cell. These mutations can be caused by chemicals or physical agents called carcinogens, by close exposure to radioactive materials, or by certain viruses that can insert their DNA into the human genome. Mutations occur spontaneously, or are passed down generations as a result of germ line mutations.
|
DUMBWAITER |
|
A small elevator used to transport food or other items between floors of a building.
An elevator is a transport device used to move goods or people vertically. Outside North America, elevators are known more commonly as lifts, although the word elevator is familiar from American movies and television shows, just as some Americans are aware of lift from imported entertainment. Other languages may have loanwords based on either elevator (e.g. Japanese) or lift (e.g. Cantonese). Because of wheelchair access laws, elevators are often a requirement in new buildings with multiple floors.
|
DUST CONTROL |
|
Dust consists of tiny solid particles carried by air currents. These articles are formed by a disintegration or fracture process, such as grinding, crushing, or impact. The Mine Safety and Health Administration (MSHA) defines dust as finely divided solids that may become airborne from the original state without any chemical or physical change other than fracture.
|
ELEVATOR |
|
An elevator is a transport device used to move goods or people vertically. Outside North America, elevators are known more commonly as lifts, although the word elevator is familiar from American movies and television shows, just as some Americans are aware of lift from imported entertainment. Other languages may have loanwords based on either elevator (e.g. Japanese) or lift (e.g. Cantonese). Because of wheelchair access laws, elevators are often a requirement in new buildings with multiple floors.
|
ENGINEERING - AUTOMATION |
|
Automation (ancient Greek: = self dictated) or industrial automation or numerical control is the use of control systems such as computers to control industrial machinery and processes, replacing human operators. In the scope of industrialization, it is a step beyond mechanization, where human operators are provided with machinery to assist them with the physical requirements of work.
|
ENGINEERING - CIVIL |
|
In modern usage, civil engineering is a broad field of engineering that deals with the planning, construction, and maintenance of fixed structures, or public works, as they are related to earth, water, or civilization and their processes. Most civil engineering today deals with roads, structures, water supply, sewer, flood control and traffic. In essence, civil engineering is a profession which makes the world a more habitable place to live.
|
ENGINEERING - ELECTRICAL |
|
Electrical engineering (sometimes referred to as electrical and electronics engineering) is a professional engineering discipline that deals with the study and application of electricity, | | |
